|
Post by bboett on Aug 8, 2018 10:27:36 GMT
Hello,
seems this forum is in english? i will try to be comprehensible.....
I tried to get an answer by mail, but no luck, so trying here.....
I am in the final stages of mounting my printer (14h54min at the counter now) and most of the material is now fixed, i just have one earth grounding cable and a short (motor?) 4 pin cable that i don't know what to do with.....
I tried to fix the detox group to the printer, and replaced the front ventilator with the aspiration nozzle, but now the front ventilator hangs limply around.... it was said that i can fix it on the side, but how? Any way i look at it, there is simply no way as it is to add this ventilator on the prinz head.....
Another thing, where's the connector to a powersource for the detox? Neither the main powercord, nor the bed powercord have a connector for it? and what is the usb port for?
Another annoyance, the end of material sensor is dangling around, there seems to be no fixation for it, normal?
If someone could post a photo on how to assemble the wiring, that woul be helpful, i still have lots of wiring hanging around, don't think that its safe or nicely looking.....
|
|