Post by 3DMS on Dec 17, 2015 10:09:21 GMT
We recently tested some GT2 16 teeth idlers, in aluminum.
The results are :
The results are :
- The aluminum idler won't break
- It's more stable due to the 3mm inner bore hole
- The GT2 teeth properly drive the belt
- The 16 teeth format properly fits the 16 teeth motor pulleys
- The belt is paralelism is better
- The vibrations are reduced
- Printing quality is increased and ghost effect is reduced.
For those interested we have some available here:
3dmodularsystems.com/en/mechanical/95-gt2-16-teeth-aluminum-idler-for-belt-tensioner.html
Enjoy3dmodularsystems.com/en/mechanical/95-gt2-16-teeth-aluminum-idler-for-belt-tensioner.html