|
Post by 3DMS on Nov 12, 2015 14:16:15 GMT
Print temperature: 165-195°C (recommended 180°C) Heat bed temperature: optional but can need some tapes such as blue paint tape of hair spray, etc… . Notes:- Powder/sandy Texture
- Nearly no deformation during printing
- Layers adhesion is very high
- Easy to work with after print
- Can easily break
- Cooling fans needs to be on during the print.
- Maximum infill 25%
- You need to cleanup the hot-end and your nozzle after each print
- Don’t use acetone on finished parts (only IPA)
source: 3dprintingforbeginners.com/3d-printing-materials-bendlay-laywood-laybrick/
|
|