|
Post by 3DMS on Nov 12, 2015 13:30:16 GMT
- Restart your printer and try again.
- Check that the filename you want to print ends by .gcode. Only this file extensions are compatible with the printer.
- Check the filesystem of your SD card, it needs to be FAT16. other filesystems are most likely not supported (FAT32, NTFS, EXT2, EXT3 etc…) .
- Some types or size of SD cards might not be compatible with the SD card reader. Often SD card of 1 or 2GB are far enough for your overall use.
|
|